Tips

Applying Proper Pressure During Heat Transfer

How much pressure is too much pressure?

This article is from our older website archives. Some content may not be formatted or attributed properly. Please Contact Us if you feel it needs to be corrected. Thank you.

Before starting on a large project, we advocate following the manufacturer’s instructions for each paper and then testing each, so that you’ll get a feel for the differences between medium and high pressure. Also, it’s important to invest in the highest quality of heat press as possible to ensure pressure consistency.

Too much pressure with a laser paper results in a release of the coating with a ghost image – that’s not what you want to happen. When pressed with correct pressure, only the toner will transfer. This is the opposite of an inkjet paper that is not weedless. The coating is supposed to transfer.

Too little pressure on a laser heat-transfer paper results in an improper bond; the transferred design will not bond to the substrate. The same occurs with an inkjet paper.

 

Tags
Show More

Gregory Markus

Gregory Markus is the president of Rhinotech. 

Related Articles

Back to top button
Close