Tips

Engrave Away the Background for a Gift Decorated with Laser Foil

One of the ways foil designs can be created is by engraving away the background. Your general guidelines here...

This article is from our older website archives. Some content may not be formatted or attributed properly. Please Contact Us if you feel it needs to be corrected. Thank you.
  1. In CorelDRAW, apply a white fill color to the logo. Next, use a solid back color-fill to create a background area around the logo. It is important that the black background is layered under the white graphic; this can be done by selecting the black background and using shift + page down key. 
  2. Apply the foil and paper mask as in method one.
  3. The power and speed for your laser should be slightly modified from the normal settings for the base foil. Add 10 percent more power to your standard settings since the laser engraves through the foil.
  4. After laser cutting the foil, remove the unwanted foil and masking material.
  5. Burnish the remaining foil with the smooth side of the white paper.

-Mike Fruciano, Coherent

Mike Fruciano

Mike Fruciano

Mike Fruciano is the Distribution Sales Manager - The Americas 3D Printing & Laser Systems at Coherent Inc. Mike brings 25 years of laser systems, laser processing, and materials experience, and is a frequent writer and speaker on these topics. Contact Mike at 602-616-4971 or at [email protected]

Related Articles

Back to top button