EducationTips

Why does a part move on the bed of my CNC router during the cutting process?

There are several reasons why a part may move on the bed during the cutting process. Here are a few examples:

  • Poor vacuum due to the condition of the sacrificial bed. If there are too many previous cut lines, your machine will experience vacuum leakage, resulting in weak hold down.
  • Too many open zones. Ideally you will only have zones open over the area of your machine you plan on processing material.
  • Material thickness. When you are processing the last few millimeters of the cut line there may be too much radial force on the part. This will invariably drag the part towards the tool, damaging both in the process. If the material is thick (10mm or above) then this will increase the chance of the part moving.
  • Swarf or chips. Any debris between your material and the sacrificial bed will create an uneven surface and allow vacuum leakage, reducing your hold down.

-Ged Lodge, AXYZ International

Avatar of Matt Dixon

Matt Dixon

Matt Dixon is the former executive editor and content manager of GRAPHICS PRO magazine. Before that he served as editor of Sign & Digital Graphics and Sign Business Magazine.

View all articles by Matt Dixon  
Allee Bruce

Alexandria Bruce

Alexandria Bruce is the former managing editor of GRAPHICS PRO magazine.

View all articles by Alexandria Bruce  

Related Articles

Back to top button