Engrave Away the Background for a Gift Decorated with Laser Foil
One of the ways foil designs can be created is by engraving away the background. Your general guidelines here…
- In CorelDRAW, apply a white fill color to the logo. Next, use a solid back color-fill to create a background area around the logo. It is important that the black background is layered under the white graphic; this can be done by selecting the black background and using shift + page down key.
- Apply the foil and paper mask as in method one.
- The power and speed for your laser should be slightly modified from the normal settings for the base foil. Add 10 percent more power to your standard settings since the laser engraves through the foil.
- After laser cutting the foil, remove the unwanted foil and masking material.
- Burnish the remaining foil with the smooth side of the white paper.
-Mike Fruciano, Coherent
Author
OUR DIGITAL PARTNERS
RELATED ARTICLES
Every holiday order needs a place to go
Prepare your shop to keep its promises.
Canvas, fine art & photo papers: Matching the media to the project
A practical look at the three big categories & what each does…
5 questions with Rachel Newman
Rachel Newman joined L.A.T. Apparel in March 2024 as chief commercial officer…
The holiday rush should not be a surprise
Christmas has been remarkably consistent about showing up in December. The fourth…