• Selling Sublimation in the Summertime

    When selling for summer, it’s best to start early. Outline the products that will make the most profit and begin presenting samples. Consider popular holidays like the Fourth of July and Father’s Day, and market your products accordingly. If you see a…

  • Marking Bare Metal with a Fiber Laser

    Although metals are reflective to the fiber laser, it takes much less power (watts) for the one-micron wavelength laser to break through the reflectivity factor. Fiber lasers can create carbon migration marks with as little as 10 watts of power. Fiber lasers…

  • What are the recommended power settings for engraving plastic sheet?

    Keep power settings as low as possible to avoid melting, warping, and distortion of the plastic sheet. Using too much power is the most common fault most laser operators have with engraving plastic sheet materials. The cap layer of the plastic is…

  • What is the general process for creating photoresist film for sandcarving?

    Most beginning sandcarvers wrongfully assume that a photoresist must be a resist made from a photograph. This is not true. The resist is produced by a photographic process, but the original is almost always black-and-white line art, not a photograph. Even though it…

  • Planning Your Day for Productivity

    Having a plan or stopping to think about something before moving forward can make a huge difference. One of the small things I like to do each day is to use two or three minutes in the morning and plan out the…

  • For the Health of Your Sublimation Printer

    Most printers have an automatic cleaning cycle that will run as long as the printer is turned on or in sleep mode. You can also run manual cleanings; if you’re not using a printer every day, it is highly recommended to do…

  • How to Create Perceived Value: Packaging and Finishing

    If you have talked to anyone about pricing in the last couple of years and gone beyond the nitty-gritty of overhead, costs, and markup, you’ve probably heard the term value-based pricing. Though there’s much more than one definition for this term, I’m…

  • What hard goods should decorators consider for sublimation?

    These are a few of the best sublimation substrates for an apparel decorator looking to branch out into sublimated hard goods: Sublimation drinkware: Either a mug press or small convection oven can do the job for most drinkware products. Fiberglass reinforced plastic:…

  • Reach Your Prospective Clients: Email Marketing

    Email marketing is another successful tool to get the word out about your business, but it has its financial pitfalls if you are not careful to target the right prospects. It can be expensive on both the front and back ends. If…

  • Expand into the Growing Market of UV-LED Printing

    The goal for most UV-LED printer owners is to leverage the technology to add value (profit) to a certain product or group of products. Others use it to make current processes better or more efficient. OK, you might say, “That’s awesome, but…

  • What extra tools or materials do I need to sublimate mugs?

    Heat resistant tape is needed to attach the transfer to the mug. It’s also a good idea to place another piece of plain copy paper around the mug to prevent ink from getting on the press or mug wrap. If you are…

  • How can I build my knowledge and experience with the laser machine?

    Test, test, test. We can’t stress it enough. Whether you’re purchasing blanks for practice, like slate coasters, or engraving common items around your home or shop, such as a kitchen cutting board, the more you experiment with different materials and settings, the…