A Simple Solution to Prevent Transfer Lines
Eliminate unwanted lines from sublimation with this advice.
The simplest way to eliminate transfer lines from sublimation is to make the paper larger than the heat press. This will illuminate the paper causing the lines. One thing to note, you can still have issues with the edge of the heat press causing lines, but this is normally due to having way too much pressure.
You want your pressure to be medium for garment transfers with sublimation and that is between 40 to 50 psi (a four or five readout on most presses). One other tip is to thread the garment to give it less depth to get pressure lines.
Author
OUR DIGITAL PARTNERS
RELATED ARTICLES
Every holiday order needs a place to go
Prepare your shop to keep its promises.
Canvas, fine art & photo papers: Matching the media to the project
A practical look at the three big categories & what each does…
5 questions with Rachel Newman
Rachel Newman joined L.A.T. Apparel in March 2024 as chief commercial officer…
The holiday rush should not be a surprise
Christmas has been remarkably consistent about showing up in December. The fourth…