Laser Tips and Tricks: Running a Job Twice

This article is from our older website archives. Some content may not be formatted or attributed properly. Please Contact Us if you feel it needs to be corrected. Thank you.

Doug Green, Express Yourself Austin, explains that by running a job twice, you can achieve more detail in an engraving job. He covers:

  • A side-by-side comparison of running a laser project as one job versus two.
  • Separating the black part of a design from the shape using CorelDRAW.
  • Running the black part of a design, then the gray.

Doug Green

Doug Green is the man behind Express Yourself Austin and countless CorelDRAW tutorials on YouTube. A master crafter, Green sometimes spends hours upon hours, if not years, to create unique and elaborate items out of wood and metal.

Related Articles

Back to top button