Tips

Gas vs. Electric Dryers

Gas and elctric dryers offer different advantages for screen printers depending on a number of different variables

This article is from our older website archives. Some content may not be formatted or attributed properly. Please Contact Us if you feel it needs to be corrected. Thank you.

Gas and electric dryers offer different advantages for screen printers depending on budget, required capacity, available floor space, and the cost of gas versus electricity.

Gas dryers have an open flame that heats the air within a chamber and transfers the heated air to the area the garments pass through. The heat is then transferred to the ink by air convection. This is the equivalent of heating food slowly in a gas oven. By contrast, an electric dryer uses infrared radiation that causes the ink molecules to vibrate, generating heat that quickly raises the temperature of the ink without heating the air around it, similar to heating food in a microwave.

The primary advantage of a gas dryer is its ability to maintain a constant temperature and avoid overheating the ink. Primary disadvantages are longer dwell times and long dryer lengths that can increase cost and consume floor space. Additionally, thick insulation is needed to prevent the outer walls from attaining dangerous temperatures. As a result, gas dryers are generally recommended for large print shops, providing that natural gas or propane is available and less expensive than electric locally.

By comparison, infrared dryers are small and less expensive because they do not require insulation and are shorter in length due to the reduced dwell times. Infrared radiation attains ink curing temperatures more rapidly and efficiently than heated air, particularly when curing plastisol inks. However, if items are conveyed through an infrared dryer too slowly, the ink can overheat and break down chemically.

Mark Vastex

Mark Vasilantone

Mark Vasilantone, president of Vastex International Inc., purchased the company in 1999 from his father and Vastex founder, Michael Vasilantone. Himself an accomplished engineer, Mark has since more than quadrupled sales worldwide and continues to revolutionize the design and performance of Vastex equipment. In 2017, he oversaw the completion of the company's purpose-built manufacturing facility and world headquarters in Bethlehem, Pennsylvania.

Related Articles

Back to top button