Tips

Ending Engraving Errors: Working with Different Wood Types

What you should know when engraving wood, whether its light or dark, or has small or large veins

This article is from our older website archives. Some content may not be formatted or attributed properly. Please Contact Us if you feel it needs to be corrected. Thank you.

Wood is one of the most laser-friendly materials available not only because it can be cut easily, but also because it engraves well. However, different woods have different reactions when they are laser engraved and produce different results.

Lighter woods, like cherry or maple, produce a nice contrast where the laser burns away the wood, while denser woods require more laser power to cut or engrave.

Grain density can change dramatically depending on the type of wood you are working with. Cherry, alder, walnut, and maple have fairly small veins of grain in them, while oak has medium to large veins. For example, if a large square was engraved into a piece of cherry, it would have a uniform appearance; the area engraved would be smooth with little variation in height. However, if the same square was engraved into a piece of oak, its appearance would vary greatly in height and would have a non-uniform appearance.

Here are some tips when engraving wood:

  • Maple and alder are some of the most popular woods for engraving, providing a rich contrast.
  • Bare wood engraving produces smoke and debris during the process that can become embedded into the grain of the wood. To reduce this effect, always engrave from the bottom up – this helps draw any smoke away from the engraving.
  • When engraving stained wood, excess smoke and debris can be wiped off the surface of the wood with a damp cloth after engraving.
amy_headshot01

Amy Dallman

Epilog Laser

Amy Dallman is the marketing communications specialist for Epilog Laser. In this role, she creates a variety of content including blog posts, sample club instructions, eNewsletters, and more.

Related Articles

Back to top button